Explanation Of The Data Transfer; Remote Control Instructions - KERN GAB-N Operating Instructions Manual

12.1.3 Explanation of the data transfer

Example:
Header1 , Header2
Header 1 2 byte, St or US, ST=weighing value stable, US=weighing value
instable
Header 2 2 byte, G or N, G=gross weight, N= net weight
space Blank
W1-W7 Weight value with decimal position
Unit 2 byte, kg or lb
Terminator <CR> <LF> (CR=Carriage return)

12.2 Remote control instructions

The remote control commands are sent from the remote control unit to the balance
as ASCII code. After the balance having received the s/w/t commands, it will send the
following data.
Take into account that the following remote control commands must be sent without a
subsequent CR LF.
T: tare Taring
Z: zero Zeroing
SI: stable status Output of instable weighing values (US) or stable weighing values
(ST)
ST stable status or Output of stable weighing values (Y) or instable weighing values
not (N)
GAB-N-BA-e-1315
, -/space W1 W2
(LF= Line Feed)
W3 W4 W5 W6 W7 , unit terminator
37