Table of Contents
Advertisement
10.6 Manual totalizing
This function is used to add the individual weighing values to the summation memory
and, if a printer is connected to provide a printout when the stability display appear
PRINT
and the
key pressed.
ESC
(For details how to set this function see chap. 11 menu "ACC on")
Place load A
(Example)
(Example)
Remove load A
Place load B
(Example)
Press
(Example)
Remove load B
GROSS
ZERO
Add more weighed goods as described before.
You can repeat this process until the capacity of the scales is
28
Wait until stability display
PRINT
Press
ESC
ACC 1 followed by the weighing value will appear and the
weighing value will be saved to the summation memory and
possibly printed.
Further loads can only be added after the display has
returned to zero.
Wait until stability display appears
PRINT
again
ESC
ACC 2, followed by the total weight will be displayed and the
weighing value added to the summation memory and
possibly printed.
Further loads can only be added after the display has
returned to zero.
Please note that the balance must be unloaded between the
individual weighing procedures.
exhausted.
appears
GAB-N-BA-e-1315
Advertisement
Table of Contents
