Entering The Wep Key With Ascii Characters - Icom AP-90M Instruction Manual

3
CONNECTING TO A WIRELESS LAN (BASIC)
3. Setting the "WEP RC4" encryption (Continued)
Wireless Settings > Wireless 1/Wireless 2 > Virtual AP
 Entering the WEP Key with ASCII characters
The following example is when the Wireless 1 (internal antenna) is set to "ath0."
Authentication:
Encryption:
WEP Key:
1
Click [Wireless Settings] and [Wireless 1], and then click [Virtual AP].
2
Select [WEP RC4 128 (104)] for "Encryption" and enter the 13 character WEP Key.
3
Click [Apply].
4
Click [Reboot].
• Follow the instructions to reboot the AP-90M.
5
After the reboot is complete, click [Back].
Open System/Shared Key (default)
WEP RC4 128 (104)
13 characters (example: RETSAMEVAWNAL)
Make sure "Open System/Shared Key" is selected.
3-6
q Select
w Enter
Click