Setting The Wireless Bridging Function To The Ap-90M For The Rs-Ap3 Management - Icom AP-90M Instruction Manual

3
CONNECTING TO A WIRELESS LAN (BASIC)
6. Setting the Wireless Bridging function (Continued)
Wireless Settings > Wireless 1 > Wireless Bridging (WDS)
Wireless Settings > Wireless 2 > Wireless Bridging (WBR)
Management > Management Tools
 Setting the wireless bridging function to the AP-90M for the RS-AP3 management
q Set the wireless bridging function on the AP-90M setting screen (Wireless 1 or Wireless 2) to enable the
communication.
w Enable "Management Tools" on the setting screen.
e Before start the access point management using the RS-AP3, set the AP-90M setting values on the "In-
dividual Configurations" screen* of the RS-AP3.
* If you want to use the wireless bridging function in Wireless 2, configure the master unit's SSID and
security settings on the "Common Configuration" screen.
Wireless 2:
Master settings on the "Common Configuration" screen.
Wireless 2:
"Common Configuration" screen.
Wireless 2:
Client settings on the "Individual Configurations" screen.
3-18