Connecting To The Pc; Using A Cable Lan Station - Icom AP-90M Instruction Manual

2
INSTALLATION GUIDE

3. Connecting to the PC

If you are connecting the AP-90M using its default settings, disconnect the network from your PC.
 Using a cable LAN station
Turn ON the AP-90M and the PC (cable LAN).
Make sure the devices are turned OFF when you connect them to together.
Indication check
[POWER]:
[LAN]:
[WIRELESS1]:
[WIRELESS2]:
*Indication differs, depending on the status
PC
(Example 192.168.0.100)
R WARNING!
To prevent electrical shock, television interference (TVI), broadcast interference (BCI) and other prob-
lems, ground the AP-90M through the ground terminal.
NEVER connect the ground terminal to a gas or electric pipe. This may result in an electrical shock or
cause a fire or explosion.
Green
Green/Orange*
Orange
Orange
LAN cable
(User supplied
Category 5e or higher)
AC outlet
Power adapter
(User supplied)
Ground terminal
Ground wire
(User supplied)
2-4
AP-90M
(Default: 192.168.0.1)
( + Continued on the next page)