Setting The Virtual Aps Individually; Setting The Radius - Icom AP-90M Instruction Manual

4
CONNECTING WIRELESS LAN (ADVANCED)

4. Setting the RADIUS

Set the RADIUS for authorizing the WPA, WPA2, or IEEE802.1X.
• To use this server, you must set the RADIUS server.
• You can select to either set the virtual APs individually or all together, on the "Virtual AP" screen.
• If you select to set all virtual APs together, set the RADIUS server on the "Authentication Server" screen.
Wireless Settings > Wireless 1/Wireless 2 > Virtual AP
 Setting the Virtual APs individually
Individually setting the virtual AP (ath0) on the Wireless 1 is used as an example.
1
Click [Wireless Settings] and [Wireless1], and then click [Virtual AP].
2
Set the "Authentication" and "Encryption."
3
Select "Enable" for "Use per Virtual AP Settings," and then enter the RADIUS server data.
• Depending on the system you use, the port number may differ from the default settings.
• Set the same password for the AP-90M in "Secret" for the primary and secondary RADIUS servers.
4
Click [Reboot].
• Follow the instructions to reboot the AP-90M.
5
After the reboot is complete, click [Back].
(Authentication example: IEEE802.1X)
4-8
Select
q Select
w Enter
e Click
Click