Automatically Setting The Wireless Lan By Using The Wps Function - Icom AP-90M Instruction Manual

2
INSTALLATION GUIDE
7. Assigning the automatic SSID and PSK in the WPS function (Continued)
This page describes how to assign the automatic set by using the [WPS] button.
(Automatically setting the SSID and PSK (Pre-Shared Key) contents to the wireless LAN station.)
Wireless Settings > WPS
 Automatically setting the wireless LAN by using the WPS function
A Windows 7's regular network connection is used as an example to describe how to automatically set the
wireless LAN station using the WPS function.
• See the wireless station's instruction manual for more details.
• If [WIRELESS] (1/2) blinks red
it manually.
1
Click the wireless network connection icon on the PC.
• It may take a few minutes until the icon appears.
2
Select the SSID assigned to the AP-90M (example: WIRELESSLAN-0) and click [Connect].
• "Connect to a Network" is displayed.
3
Push [WPS] on the AP-90M.
[WIRELESS] (1/2) slowly blinks green
4
The setting is completed when [WIRELESS] (1/2)
stops blinking and lights green
• The indication differs, depending on the Virtual AP (exam-
ple: ath0) setting.
and settings cannot be made, set "None" for "Interface" (
Click
q Select
w Click
"Security key" does not need to be entered.
• If the connection fails, enter the PSK and
click [OK].
.
.
2-12
p.2-11) to set
+
Wireless 1 Wireless 2
(ath0 to ath3) (ath4 to ath7)