Service Primary Code; Service Secondary Error Codes; Service Tertiary Error Codes - Lexmark E120 Service Manual

4506-1xx

Service primary code

When this code appears, double-click

Service secondary error codes

Service secondary light patterns

Service tertiary error codes

Service error codes are generally non-recoverable except in an intermittent condition when you can POR
(power-on reset) the printer to temporarily recover from the error.
Note: All service errors are initially communicated by all lights flashing which is the primary indication or code.
For brevity, this indication is not repeated in the following codes.
2-18
Service Manual
to reveal the secondary codes.
Light on
Light off
Light blinking
x
Light blinking slowly
Description/action
This service primary code indicates that a secondary code is
available.
Secondary light pattern
Description/action
90x Software
91x DC motor or transfer roll
92x Fuser or toner sensor
93x Printhead, drive motor, RIP to engine
94x RIP to engine communications, engine electronics
95x Controller card (NVRAM, ROM, or NAND)
96x RAM memory
97x Network
98x Paper port communications
Programming error
Unsupported firmware/controller card