Diagnostics Mode Descriptions; Development; Service Menus-E120N; Printing Menus - Lexmark E120 Service Manual

Diagnostics mode descriptions

Development

Menu item
Print quality pages
Defaults
Service menus—E120n

Printing menus

Diagnostics mode

To enter Diagnostics mode, turn off the printer, open the front access cover, and press and hold
on the printer. Close the cover when the
Print menus by pressing and holding
page 3-4.

Configuration menu

To enter Configuration menu, turn off the printer, open the front access cover, turn on the printer while pressing
and holding
Print menus by pressing and holding
page 3-7

Moving around the menu

The menu items are designated by the non-indented items listed along the left edge of the page (bottom as
printed from the printer). These items are also un-shaded.
•
Press and release
•
Press and hold
•
Press and release
This action rotates only through the possible settings of the selected menu item.
Use setting to
Print the print quality test pages and history
information by pressing and holding
lights flash.
Help isolate print quality problems, such as
streaking. Four or more pages print:
• A text page with printer information, cartridge
information, current margin settings, and a
graphic
• Two pages with graphics
• A blank page
• An error log (history)
Note: The cartridge lockout function is disabled.
Change default media sizes and designations from
U.S. to non-U.S. to metric.
until the lights flash. See
, and close the cover once the
until the lights flash. See
to move sequentially from one menu item to another.
to jump to the home state (top four lights on).
to move through the menu settings (indicated by the
until the
light displays.
"Diagnostics mode printout sample" on
light displays.
"Configuration menu printout sample" on
4506-1xx
Value
U.S. (default)
Non-U.S.
while turning
and lights).
Diagnostic aids
3-3