Displaying The Osd Main Menu - NEC MD302C6 Installation & Maintenance Manual

Enable Functions
Disable
Enable Switching Input Source
Enable Switching Input Port
Enable Both Functions
* "Disable" is selected by default.
Press the MENU button and return to the Direct OSD Setting Menu in step 2.
NOTE: The OSD menu disappears in 15 seconds.
Selecting switching mode of an input signal

1. Displaying the OSD main menu

Press and hold the MENU button for 2 seconds. The OSD main menu appears.
Press either + or - button to move the cursor " " and select "DIRECT OSD SETTING MENU".
2. Direct OSD setting menu
Press the MENU button and the DIRECT OSD SETTING MENU screen appears.
Press either + or - button to move the cursor " " and select "INPUT SOURCE BUTTON MODE".
Direct OSD Setting Menu
ENABLE FUNCTIONS
INPUT SOURCE BUTTON MODE
EXIT
Disables both input signal switching and input port
switching.
(When you try disabled switching operation, the menu will
show "LOCKED").
Enables input source switching only.
(When you try input port switching, the menu will show
"LOCKED").
Enables input port switching only.
(When you try input source switching, the menu will show
"LOCKED").
Enables both input signal switching and input port
switching.
Direct OSD Setting Menu
DIRECT OSD SETTING MENU screen
Sets the selected function to be enabled.
Selects switching mode for input signals.
Closes the submenu.
English-26
Explanation
Explanation