Direct Osd Setting Menu - NEC MD302C6 Installation & Maintenance Manual

Direct OSD setting menu

The direct OSD setting menu allows function setting to be enabled or the mode setting to switch an input signal. Follow the
instructions below. By default, this function is disabled.
Functions to be enabled
1. Displaying the OSD main menu
Press and hold the MENU button for 2 seconds. The OSD main menu appears.
Press either + or - button to move the cursor " " and select "DIRECT OSD SETTING MENU".
2. Direct OSD setting menu
Press the MENU button and the DIRECT OSD SETTING MENU submenu appears.
Press either + or - button to move the cursor " " and select "ENABLE FUNCTIONS".
Direct OSD Setting Menu
ENABLE FUNCTIONS
INPUT SOURCE BUTTON MODE
EXIT
3. Setting of functions to be enabled
Press the MENU button and the ENABLE FUNCTIONS submenu appears.
Press either + or - button to move the cursor " " and select the preferred function.
Direct OSD Setting Menu
DIRECT OSD SETTING MENU
Sets the selected function to be enabled.
Selects switching mode of an input signal.
Closes the submenu.
ENABLE FUNCTIONS
English-25
Explanation