Table of Contents
Advertisement
BLSL3060 Manual_Layout 1 2/10/2014 5:00 PM Page 25
Installation: Accessory Connections
ACCESSORY CONNECTIONS:
Reopen Photo Beam
Note: Installing the photo beam in this way,
allows the gate to re-open all the way upon
obstruction of the photo-beam.
The optional PBD connector provides a
controlled power supply for Photo Beam.
The power will be turned off when gate is
in close position to save battery.
BLSL3060
To decrease the possibility of vehicle entrapment on the gate, vehicle loop detectors
need to be installed. The edge sensor and the photo-electric beam can be used for
secondary entrapment protection on every installation to prevent pedestrian or
animal entrapment. These accessories must be UL325 compliant devices.
Safety Connections
Photo
Beam
Edge Sensor
TX
Safety
Loop
Detector
TECHNICAL SUPPORT: (909) 259-6001
Open
Commands
Fire
Override
Exit Loop
Detector
TX
Photo
Beam
Outside
Inside
Keypad
Option for
Solar Power
Input ONLY
23
Advertisement
Table of Contents
