Miele DGC6500 Operating And Installation Instructions page 132

Frequently asked questions
Problem
F and a number
appear in the
display:
F 10
F 11
F 20
F 44
F 55
132
Possible cause and remedy
The suction hose in the water container is
– not properly attached.
– not vertical.
^ Correct the position of the suction hose:
Drain hose clogged.
^ Descale the appliance. If the fault message shows again,
contact Miele.
Communications failure
^ Turn the appliance off and after a few minutes on again.
If the error message still appears, contact Miele.
The maximum length of time for operating in a mode has
been exceeded and the safety shutdown has turned the
appliance off.
^ The appliance can be used again immediately by simply
turning it off and back on again.