Initial Cleaning; Setting The Water Hardness Level - Miele DGC6500 Operating And Installation Instructions

Combi steam oven
Table of Contents

Advertisement

Initial cleaning

Water container and condensate container
Accessories / Oven interior

Setting the water hardness level

A functional test is carried out on the appliance at the
factory, which is why some water may drip from the lines
into the oven compartment during transport.
^ Remove any protective wrappings.
^ Take the water and condensate containers out of the
appliance wash in the dishwasher or by hand.
^ Take all accessories out of the oven interior.
^ Clean the cooking containers by hand or in the dishwasher.
The Universal tray and the combi-rack are PerfectClean
coated and should only be cleaned by hand. Please refer to
the "PerfectClean" section.
^ Clean the universal tray and the combi-rack with a clean
sponge, dishwashing liquid and warm water.
^ Wipe the interior with a damp cloth to remove any dust or
bits of packaging that may be in the oven.
The Combi Steam Oven is factory set to the "Hard" water
hardness setting. To ensure that it is functioning properly and
descaled at the right time, you must set the local water
hardness. The harder the water, the more often the appliance
will require descaling.
^ Check which water hardness is set, and if necessary, set
the correct water hardness (see "Settings").
Before using for the first time
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgc6600

Table of Contents