Operating instructions
Filling the water container
Selecting a program
Setting the temperature
30
Check before each cooking process that the drain filter is
fitted correctly, since coarse food particles can clog the
drain.
Make sure you do not touch the the appliance door handle
while the panel is opening or closing. Danger of jamming
fingers!
^ Tap "Lift Panel" to open the panel.
^ Remove the water container (right), and fill it up to the
"max" mark.
Use only cold tap water (below 68°F / 20°C). Do not use
distilled water, sparkling water or other liquids.
^ Push the water container into the appliance until it
connects.
^ Tap "Lift Panel" to close the panel.
^ Turn the appliance on s.
^ Select "Operating Mode".
^ If the desired mode is not displayed, touch one of the
illuminated buttons to the right of the display until the mode
appears.
^ Touch the desired operating mode.
^ Confirm the recommended temperature with "OK".
or
^ Set the desired temperature using the numeric keypad,
and then touch "OK" to confirm.