Choice Of The Burner - DeLonghi DTC 95 DF Instruction Manual

CHOICE OF THE BURNER

On the control panel, near each knob, there is a diagram that indicates which burner
is controlled by that knob.
Select the burner that is most suitable for the diameter and capacity of the pan to be
used.
s an indication, the burners and the pans must be used in the following way:
BURNERS
uxiliary
Semi-rapid
Rapid
Triple-ring
Wok
do not use pans with concave or convex bases
It is important that the base diameter of the pot is at least the same diameter as the
burner ring to obtain an efficient heat transfer.
lways position pans centrally over the burners.
djust the size of the flame so that it does not lick up the side of the pan.
Position pan handles so that they cannot be accidentally knocked.
CORRECT USE OF TRIPLE-RING BURNER
The flat-bottomed pans are to be placed directly onto the pan-support.
To use the WOK you need to place the proper stand in order to avoid any faulty
operation of the triple-ring burner (Fig. 4.3a - 4.3b).
IMPORT NT:
The wok pan stand (fig. 4.3b) MUST BE PL CED ONLY over the pan-rest for the
triple-ring burner.
WRONG
POT DI METER
12 - 14 cm
16 - 24 cm
24 - 26 cm
26 - 28 cm
max 36 cm
Fig. 4.3a
Fig. 4.2
CORRECT
Fig. 4.3b
13