Table of Contents
Advertisement
UTOM TIC OVEN
COOKING
To cook food automatically in the oven,
it is necessary to:
1.Set the length of the cooking time
2.Set the end of the cooking time
3.Set the temperature and the oven
cooking programme.
These operations are done in the
following way:
1.Set the length of the cooking time by
pushing the
button to
to go back if you have passed the
desired time (fig. 3.5). The
and the
symbol will be on.
2.Set the end of the cooking time by
pressing the
cooking time already added to the
clock time will appear), and the
button (fig. 3.6); if you pass
the desired time you may get back by
pushing the
fter this setting, the
go off. If after this setting, the UTO
flashes on the panel and a buzzer
goes off, it means there was an error
in the programming.
In this case, modify the end of
cooking time or the cooking time
itself by following the above
instructions again.
Fig. 3.5
10
button and the
advance, or
UTO
button (the
button.
symbol will
3.Set the temperature and the cooking
programme by using the switch and
thermostat knobs of the oven (see
specific chapters).
Now the oven is programmed and
every thing will work automatically, that
is the oven will turn on at the right
moment to end the cooking at the
established time.
During cooking, the
on.
By pushing the
see the time that remains until the end
of cooking.
The cooking programme may be
cancelled in any moment by pushing
.
t the end of the cooking time the
oven will turn off automatically, the
symbol will turn off,
and a buz zer will sound, which can be
turned off by pushing any of the but -
tons.
Turn the switch and thermostat knobs
to zero and put the programmer onto
"manual" by pressing the
ttention:
power cut makes the
clock go to zero and cancels the set
programmes.
fter a power cut three zeroes will flash
on the panel.
Fig. 3.6
symbol remains
button you can
UTO will flash
button.
Hide quick links:
Advertisement
Table of Contents
