DeLonghi DTC 95 DF Instruction Manual page 11

SEMI- UTOM TIC
COOKING
This is used to automatically switch off
the oven after the desired cooking time
has elapsed.
There are two ways to set your oven:
1. Set the length of the cooking time by
pushing the
button to advance, or
to go backwards if you have passed
the desired time (Fig. 3.7).
2. Set the end of the cooking time by
pushing the
button to advance, or
to go backwards if you have passed
the desired time (Fig. 3.8).
UTO and the
on.
Then set the temperature and the
cooking programme using the oven
switch and thermostat knobs (see
specific chapters).
The oven is switched on and it will
be switched off automatically at the
end of the desired time.
During cooking, the
remains on and by pressing the
button
that remains till the end of the
cooking.
The cooking programme can be
cancelled at any moment by pushing
the button.
button and the
or
button and the
symbol will be
symbol
you can see the time
t the end of cooking, the oven and
the symbol will turn off, the
will flash and a buzzer will sound; that
can be stopped by pushing any of the
buttons.
Turn the switch and thermostat knobs
to zero and put the programmer onto
"manual" by pressing the
Fig. 3.7
Fig. 3.8
UTO
button.
11