Pima hunter-pro User Manual page 26

26
IMPORTANT!:
The Follow-Me number is valid for one arming cycle and will be erased when system
is disarmed.
!
To program a telephone number (1 to 4):
[
Telephone Sequence Number (1 to 4)
ENTR
[
g
Example:
To program Telephone #2 as 33-1-12345678, enter the Master Code, press the
PHONE
6
number (e.g., 33112345678), press
twice.
NOTES:
You can program up to four telephone numbers to which the HUNTER-PRO will call in
an emergency.
If you connect the HUNTER-PRO Alarm System on a PBX extension, remember to
enter the prefix number and an asterisk before the telephone number, e.g., 9*555-
5555. For simplicity, you can ask the installer to program the prefix number such that
the system will automatically dial it before every number it dials.
The HUNTER-PRO Alarm System calls all telephone numbers and plays a
synthesized tone when you pick up the phone. Dial your Master Code and then "0"
(zero) on your touch-tone telephone to command the HUNTER-PRO to stop dialing
the rest of the telephone numbers.
You can ask your installer to install an optional VU-20 unit that will play a pre-recorded
message instead of the synthesized tone.
User Manual
PHONE SERVICE
6 NEXT
[
END
[
SERVICE
NEXT
key, press
- Intruder Alarm System
[
Master Code
SERVICE
NEXT
[
[
Telephone Number
END
[
MEMORY
2
twice, press
ENTR
, and end with pressing
HUNTER-PRO
[
.
[
, enter the phone
END