Panic; Onboard Relay - Pima hunter-pro User Manual

HUNTER-PRO Intruder Alarm System - User Manual
NOTE:
C
The letter (for Chime) in the display above the zone number is visible only
after you enter the Master code.
!
To cancel a Chime Zone:
[
Zone Number
!
To enable the Chime feature: Press and hold
Chime is Active
message:
sec on the LCD display.
!
To disable the Chime feature: Press and hold
Chime non Active
message:
3 sec on the LCD display.
NOTE:
When you enable and disable the Chime feature, you collectively enable and
disable the chime feature for all the zones that are defined as Chime Zones.

3.3 Panic

!
To initiate a Panic Response: Press and hold
RESET
#
NOTE:
You can customize your system's response to a panic event, for example, calling
the Monitoring Station or your private telephone number, activate a relay (video
camera), activate siren, etc. Consult your installer about programming the
appropriate Panic Response for your needs.

3.4 Onboard Relay

[
Master Code
RESET
#
[
simultaneously for two seconds.
CHIME
[
*
END
[
.
CHIME
*
. The
is displayed for about 3
CHIME
*
. The
is displayed for about
CHIME
*
and
19