Bypass Entry Countdown; Alarms; Chime - Pima hunter-pro User Manual

18
END
Press
open zone and commence with the exit countdown. You must press one of the two
choices; otherwise the system will automatically commence with the exit countdown
and sound the alarm once it is armed.
The zone that you bypassed will be restored when you disarm the system.
3.1.3

Bypass Entry Countdown

This feature cancels the Entry delay time countdown. Thereby,
triggering an alarm as soon as any zone/entrance is opened.
The bypass is valid for only one arming cycle. You must bypass
the entry countdown before you enter an arming code:
!
To temporarily bypass the Entry Delay Time: Press and hold
PROGRAM
0
3.1.4

Alarms

3.1.4.1
Smoke and fire detectors require a "Reset" command after they have been activated.
!
To reset the smoke or fire detector output: Press and hold
RESET
#
3.1.4.2
!
To identify a zone that triggered an alarm: The letter
displayed above the Zone number that triggered the alarm.

3.2 Chime

This feature activates a buzzer in the keypad when a Chime
Zone is triggered. This feature is useful to monitor doors and
entrances when the system is disarmed.
!
To define a Chime Zone:
[
zone number
User Manual
to stop the arming procedure, or press
.
From fire and smoke detectors
.
From any zone
[
ENTR
[
- Intruder Alarm System
[
Master Code
END
[
HUNTER-PRO
BYPASS
3
to bypass the
A
is
CHIME
*
.