Nikon Eclipse 50i POL Instruction Manual page 66

(1) Loosen the lamphouse cover clamp screw using the hexagonal wrench.
(2) Remove the lamphouse cover.
(3) Push down the lamp clamp lever and remove the old lamp.
(4) With the lamp clamp lever held down, insert the electrodes of a new lamp into the pin
holes of the socket. Press the lamp as far as it goes, and then release the lamp clamp
lever to secure the lamp.
Be careful not to touch the glass surface with bare hands.
When releasing the lamp clamp lever, use care so that the lamp does not tilt.
(5) Close the lamphouse cover and secure it by tightening the clamp screw.
CAUTION
Be sure to attach the lamphouse cover. Failure to do so may result in burns or
fire from the heat generated by the lamp.
Chapter 5 Replacing Consumables
5.1 Replacing the lamp
64