Nikon Eclipse 50i POL Instruction Manual page 63

11
Attaching a camera (for the trinocular eyepiece tube)
To attach a photomicrography device such as a camera onto the vertical tube of the trinocular
eyepiece tube, you must use two adapters: First, attach the TV vertical tube adapter or the TV
vertical tube adapter 0.55X onto the trinocular eyepiece tube. Second, attach a suitable adapter
for the camera mount part (C mount adapter or so on) onto the TV vertical adapter.
Check the mount part type of your camera and prepare the suitable adapter beforehand.
(1) Mount the TV vertical tube adapter or the TV vertical tube adapter 0.55X onto the vertical
tube section of the trinocular eyepiece tube.
(2) Attach the suitable adapter for the camera onto the tip of the TV vertical tube adapter.
(3) Attach the camera head to the adapter tip.
(4) Attach the camera cable to the camera head.
Adjust the camera head position before using the camera.
12
Attaching the power cord
(1) Check to confirm that the microscope power switch is off.
(2) Insert the power cord into the AC inlet at the back of the microscope.
(3) Insert the other end of the power cord into a wall outlet.
The microscope assembly is now completed.
Chapter 4 Assembly
Power switch for
the microscope
61
AC inlet