Decimal Point Selector Switch; Rounding Switch; Constant Switch; Accumulation Switch - Canon CP1013D II Instruction Manual

DECIMAL POINT SELECTOR SWITCH

– Used for designating the decimal point position
(F, 6, 4, 3, 2, 1, 0, +1, +2) for calculated results.
F (Floating Decimal point) – All effective numbers up to 10
digits (CP1013D II) or 12 digits (CP1213D II) are printed or
displayed.
+1, +2 (Add-Mode) – Addition & subtraction (+1) or
Multiplication (+2) functions are performed with an 2-digit
decimal. It is convenient for currency calculations.

ROUNDING SWITCH

– Used for round-up [
[
5/4

CONSTANT SWITCH

– Set the switch to "K" for performing multiplication and
division by a constant.

ACCUMULATION SWITCH

– Set the switch to "AM", the entered number will be
automatically accumulated in the memory regiter by
pressing the

ITEM COUNT / AVERAGE CALCULATION SWITCH

At "n+" or "n+/–" position, the calculator count and print the
number of calculation items up to 9999.
<ITEM COUNTER>
When the "ITEM" switch is set at "n+", the calculator counts
the number of times the
When the switch is set at "n+/–", the calculator counts the
number of times the
the total numbers of times the
<MEMORY ITEM COUNT>
When the "ITEM" switch is set at "n+", the calculator counts
number of times
When the switch is set at "n+/–", the calculator counts the
number of times the
the total number of times the
] to the pre-selected decimal digits in the result.
key
and
] , round-off [5/4], or round-down
and keys are pressed.
key is pressed and subtracts from
key is pressed.
keys are pressed.
key is pressed and subtracts from
key is pressed.
2