Recall Item Count / Item Plus Key; Overflow Function; Specifications; Carrying Handle - Canon CP1013D II Instruction Manual

RECALL ITEM COUNT / ITEM PLUS KEY

Recalls and prints the number of items. An entered number
can be added to the Item Counter with the

OVERFLOW FUNCTION

In the following cases, "E" is displayed, a dotted line is printed, the
keyboard is electronically locked, and further operation is impossible.
Press to clear the overflow. The overflow function occurs when:
1. The result or the memory content exceeds 12 digits to the left of the
decimal point.
2. Dividing by "0".
3. The sequential operation speed is faster than the calculation
processing speed. (Buffer Register Overflow)
Electromagnetic interference or electrostatic discharge may cause the
display or the memory and tax rate to be lost or altered. Should this
occur, disconnect the plug from the electrical socket-outlet and connect
after 30 seconds interval to restart the calculator. After restart be sure to
set the tax rate again.

SPECIFICATIONS

Power Source: AC 120V, 60Hz
Operation Temperature: 32°F to 104°F (0°C to 40°C)
Calculating Capacity:
10 digits maximum (CP1013D II) / 12 digits maximum (CP1213D II)
Dimension: 240mm(L) x 340mm(W) x 87.5mm(H) /
9-29/64" (L) x 13-25/32" (W) x 3-7/16" (H)
Weight: 1840 g (65 oz)
(Subject to change without notice)

CARRYING HANDLE

A handle is provided for your convenience in carrying the calculator.
When using the calculator, you can raise the back by locking the handle
into position as shown in the illustration. When the handle is placed
against a wall, it will prevent the calculator from moving toward the wall
and entrapping the paper roll.
PUSH
PUSH
4
key.