Decimal Point Selector Switch; Rounding Switch; Grand Total / Tax Rate Set Switch; Print / Item Count Switch - Canon MP25-MG User Manual

DECIMAL POINT SELECTOR SWITCH

– Used for designating the decimal point position
(+ 0 2 3 4 6 F) for calculated results.
+ (Add-Mode) – Addition and subtraction functions are
performed with an automatic 2-digit decimal. It is convenient
for currency calculations.
F (Floating Decimal Point) – All effective numbers up to 12
digits are printed or displayed.

ROUNDING SWITCH

– Used for round-up [

GRAND TOTAL / TAX RATE SET SWITCH

GRAND TOTAL
– When the calculations are performed with the GT switch set
TAX RATE SET
– Set switch to "TAX RATE SET" for setting or recalling the TAX

PRINT / ITEM COUNT SWITCH

Print Off – Entries and results will appear on the display, but
will not be printed out.
Print On – Entries and results will appear on the display and
will be printed out.
Item – Set switch to "ITEM" to count the number of times the
will be printed on the left hand side of the paper roll (up to 999
times) when the
to the pre-selected decimal digits in the result.
to "ON", the total(s) are accumulated in the grand total
memory. Each time
printed with the symbols G+. When
intermediate grand total is printed with the symbols G
Press successively to get the grand total followed by the
symbols G .
rate.
, , and
] , round-off [5/4], or round-down [
is pressed, the subtotal number is
keys have been pressed. The item count
, , or keys are pressed.
- 4 -
is pressed, the
]
.