Eneo VKC-1338A/PIR Installation And Operating Instructions Manual page 20

Options
5. Sensitivity Adjustment:
Max.
„SVR"
6. Dwell Time Adjustment:
Max.
„SVR"
Adjustable from  to 40 sec.
7. Power Input: DC V
8. Camera Connector:
CN1
GND
VIDEO
No Audio
(4 pin)
GND
VCC
AUDIO
GND
9. Camera Input/ Output
Terminal:
VCC GND VIDEO AUDIO
Description
Raise Sensitivity: Turn clockwise to detect longer
distance and wider pattern.
Min.
Lower Sensitivity: Turn counter clockwise for
detection in narrow areas.
The Dwell Time Adjustment setting controls how
long the alarm remains triggered after activation.
Min.
Max. Dwell Time: Turn clockwise.
Min. Dwell Time: Turn counter clockwise.
• Set to „ Pulse„ from J3, and then turn „SVR"
clockwise to extend dwell time of sensor
mechanically, counter clockwise to shorten
dwell time of PIR sensor.
Standby Current: 3mA
Working Current: 7mA
Camera connection using cables (4Pin / 6Pin)
supplied.
4 Pin Cable: Non-audio type connection method
6 Pin Cable: Audio type connection method
Audio
(6 pin)
Tip: User preference for an alternative connection
solution, connect CN with Camera Input /
Output Terminal.
Camera power input, video and audio output
connection.
Tip: User preference for an alternative connection
solution, connect Camera Input / Output
Terminal with CN.
0