Setting the printer
To use the device on a DHCP environment, set
the IP address setup method to automatic.
Further, the default factory setting is to set the
IP address automatically, so implementing this
procedure is unnecessary.
1
Press the scroll button
2
Select [Admin Setup], and press the
[OK] button.
3
Enter the administrator password, and
press the [OK] button.
4
Select [Network Setup], and press the
[OK] button.
Admin Setup
�
Network Setup
�
USB Setup
�
Print Setup
�
PS Setup
�
PCL Setup
�
XPS Setup
Use Online button to return to standby screen
5
or
.
6
7
1/3 Page
- 227 -
Select [IP Address Set], and press the
[OK] button.
Network Setup
�
TCP/IP
�
NetBIOS over TCP
�
EtherTalk
�
IP Address Set
�
IPv4 Address
�
Subnet Mask
Use Online button to return to standby screen
Select [Auto], and press the [OK]
button.
Network Setup
IP Address Set
�
�
TCP/IP
Auto
�
�
NetBIOS over TCP
Manual
�
EtherTalk
�
IP Address Set
�
IPv4 Address
�
Subnet Mask
Use Online button to return to standby scr
Use Online button to return
Press the [ON LINE] button to return to
the standby screen.
Using DHCP
1
1/3 Page
2
3
1/1 Page
4
5