Macintosh Utilities; Panel Language Setup; Operations Environment; Setting The Printer - Oki C931 User Manual

Macintosh utilities

z

Panel language setup

Operations environment

Macintosh operating the Japanese language
versions of Mac OS X 10.3.9 to 10.9

Setting the printer

You can change the display language of the
control panel.
1
Output the device menu map.
(1)
Press the [Fn] key.
The numerical values input screen
will be displayed.
(2)
Press [1], [0], [0], and press the
[OK] button.
2
Start the panel language setup utility.
Reference
See "Installing utilities"
z
(P.178).
- 205 -
3
Select a connection method.
If [TCP/IP] has been selected, enter the
IP address. You can check the IP address
using the menu map output in Step 1.
4
Click [OK].
5
Check that the value of the "Language
Format" in the menu map and the value
of the language version displayed in the
window match the following conditions.
Condition 1: the least numbers of the
version match
Condition 2: the value of the language
version shown in the window is either the
same or newer (greater) than the value of
the "Language Format"
Memo
z If condition 1 is not satisfied, the language
settings cannot be downloaded. If the settings are
downloaded without condition 1 being satisfied,
an error will be displayed on the control panel. To
recover, restart the device. Even if condition 1 is
satisfied, if condition 2 is not satisfied, some of the
settings names may be displayed in English.
6
Select the language.
7
Click [Download].
The file to set the language will be sent
to the device, and a message stating that
transmission has finished will be displayed.
8
Restarts the device.
Macintosh utilities
1
2
3
4
5