Oki C931 User Manual page 213

„ TCP/IP
Item
Configuration
Web Page Tool/ Network
Setting Plug-in
IP address IP address
setting acquisition
method
IPv4 address IP address
Subnet mask Subnet mask
Gateway Default
address gateway
address
DNS server -
address
(primary)
DNS server -
address
(secondary)
Dynamic DNS -
Domain name -
WINS server -
(primary)
WINS server -
(secondary)
Scope ID -
Windows -
Macintosh -
Printer name -
WSD Print -
LLTD -
„ EtherTalk
Item
Configuration
Web Page Tool/ Network
Setting Plug-in
Zone name -
Printer name -
Factory
Network Card
Default
Setup Utility
Settings
(Mac OS X)
IP address Auto
acquisition
method
IP address xxx.xxx.xxx.
xxx
Subnet mask xxx.xxx.xxx.
xxx
Default xxx.xxx.xxx.
gateway xxx
address
- 0.0.0.0
- 0.0.0.0
- Disable
- (None)
- 0.0.0.0
- 0.0.0.0
- (None)
- Disable
- Enable
- OKI-(Product
name)-(Last 6
digits of MAC
address)
- Enable
- Enable
Factory
Network
Default
Card Setup
Settings
Utility
(Mac OS X)
- *
- (Product
name)
- 213 -
Explanation
Specifies the IPv4 address setup methods.
Sets the IPv4 address.
Sets the subnet mask.
Sets the gateway address.
Specifies the IP address of the primary DNS
server.
Make sure to set this item if specifying the STMP
server using the domain name.
Specifies the IP address of the secondary DNS
server.
Make sure to set this item if specifying the STMP
server using the domain name.
Specifies whether to register the information to
the DNS server when the settings have changed.
Sets the domain name for the device.
Specifies the WINS server name or IP address
(Windows only).
Specifies the WINS server name or IP address
(Windows only).
Specifies the WINS Scope ID. Specify using 1 to
233 single-byte characters.
Specifies whether to use the Windows auto
detection function.
Specifies whether to use the Macintosh auto
detection function.
Specifies the device name displayed when the
auto detection function is enabled.
Specifies whether to use WSD Print.
Specifies whether to use LLTD.
Explanation
Specifies the EtherTalk zone name using 32
single-byte characters max.
Specifies the EtherTalk printer name using 31
single-byte characters max.
Network setting items
1
2
3
4
5