Network/Ports Menu - Lexmark MX410 series User Manual

Understanding the printer menus
Use
Print Directory
Print Demo
Demo Page
[list of available demo pages]
Asset Report
Event Log Summary

Network/Ports menu

Active NIC menu
Use
Active NIC
Auto
[list of available network cards]
Standard Network or Network [x] menu
Note: Only active ports appear in this menu.
Use
Energy Efficient Ethernet
Enable
Disable
PCL SmartSwitch
On
Off
To
Print a list of all the resources stored in an optional flash memory card or printer
hard disk.
Notes:
•
Job Buffer Size must be set to 100%.
• Make sure that the memory card or hard disk is installed and working
properly.
Print demo files that are available in the firmware, the flash option, and the disk
option.
Print a report containing printer asset information, such as serial number and
model name.
Print a summary of logged events.
To
Notes:
•
Auto is the factory default setting.
•
This menu item appears only when an optional network card is installed.
To
Reduce power consumption when the printer receives no data from the Ethernet
network.
Note: Enable is the factory default setting.
Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
• If PCL SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
139