Lexmark MX410 series User Manual page 159

Understanding the printer menus
Use
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Paper Saver
Off
2‑up Portrait
4‑up Portrait
2‑up Landscape
4‑up Landscape
Print Page Borders
On
Off
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Staple
Off
On
To
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Specify whether an original document is two‑sided or one‑sided, and then specify
whether the copy should be two‑sided or one‑sided.
Note: 1 sided to 1 sided is the factory default setting. This setting is selected when
using a one‑sided original document for a one‑sided copy job.
Copy two or four sheets of a document on one page.
Note: Off is the factory default setting.
Specify whether a border is printed.
Note: Off is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: (1,2,3) (1,2,3) is the factory default setting.
Enable the staple finisher.
Notes:
• Off is the factory default setting.
•
This menu item appears only when a staple finisher is installed.
159