Lexmark MX410 series User Manual page 282

Troubleshooting
Action
Step 4
Send a print job, and then check for print quality problems.
a
From the General Settings menu, adjust the Eco‑Mode settings.
b
From the Copy menu, adjust the Darkness setting.
c
If the print remains faded, then replace the toner cartridge.
Is the print quality satisfactory?
Step 5
Check the placement of the document or photo.
Make sure the document or photo is loaded facedown on the scanner
glass in the upper left corner.
Is the document or photo loaded correctly?
Step 6
Check the copy settings.
From the Copy screen, check if the Content Type and Content Source
settings are correct for the document being scanned.
Are the Content Type and Content Source settings correct for the
document being scanned?
Step 7
Check for patterns on print.
a
From the printer control panel, navigate to:
Copy > Sharpness > select a lower setting
Note: Make sure no scaling is being selected.
b
Resend the copy job.
Do patterns appear on prints?
Step 8
Check for missing or faded text on prints.
a
From the Copy screen, adjust the settings of the following:
•
Sharpness—Increase the sharpness setting.
•
Contrast—Increase the contrast setting.
b
Resend the copy job.
Do prints have missing or faded text?
Yes No
Go to step 5. See
problems" on
page
Go to step 6. Place the document or
photo facedown on the
scanner glass in the
upper left corner.
Go to step 7. Change the Content
Type and Content
Source settings to
match the document
being scanned.
Go to step 8. The problem is solved.
Go to step 9. The problem is solved.
282
"Print quality
262.