Safety Precautions - WaterLogic WL800 – MAX II Operating, Installation And Service Manual

Basic safety precautions should be followed, including the following:
DANGER! If incorrectly installed, operated or maintained, this product can cause death or severe
injury. Those who install, operate, or maintain this product should be trained in its proper use, warned of
its dangers, and should read the entire manual before attempting to install, operate, or maintain this
product.
WARNING! Unit is to be used for its intended purpose as described in this manual, and untrained
individuals who use this manual assume the risk of any resulting property damage or personal injury.
WARNING! HOT WATER. Unit produces Very Hot Water up to 203
severe burns or scalding. Keep unauthorized people and children away from the unit to avoid accidental
dispensing of hot water. Children should not use without supervision.
ELECTRICAL SHOCK HAZARD. Always unplug from power supply prior to servicing
DANGER!
equipment to prevent electrical shock.
WARNING!
This system to be used for water only and is not intended for use where water is
microbiologically unsafe or with water of unknown quality without adequate disinfection before or
after the system. The system is designed for the supplemental bactericidal treatment of either treated
and disinfected public drinking water, or other drinking water, which has been tested and deemed
acceptable for human consumption by the state or local health agency having jurisdiction. The system is
designed to reduce normally occurring non-pathogenic or nuisance microorganisms only. System is not
intended for treatment of contaminated water.
Dispenser Could Tip or Fall causing serious injury. Always install unit on a firm, flat, and
WARNING!
level surface and secure the WL800 to the base cabinet with the screw provided to lock the components
together. Never place heavy items on top of unit and never climb, stand, or hang on unit or storage
cabinet to prevent injury and damage.
INDOOR USE ONLY. Do not install outdoors or where unit is in direct sunlight. Do not
CAUTION!
install where ambient temperature goes below 50F or above 97F. Avoid high humidity and moisture.
Product life and performance will be impacted and warranty could be voided.
WL800 Operating, Installation, and Service Manual

SAFETY PRECAUTIONS

o
o
F. Water above 125 F can cause
Page 6 - Revision: 5-14-2015