Output Channel - Limiter - QSC TouchMix-8 User Manual

Output Channel – Limiter
The Limiter keeps the audio level from going above the set Threshold.
Home Select the
Aux Bank
Aux Outputs
Refer to — Figure 34
1. Limiter Tab – Selects the Limiter screen
2. In – RMS input level
3. Out – Output level
4. NR – Gain Reduction – indicates how much the signal is being reduced by the Limiter.
5. Limiter Nraph – When the Limiter is engaged, the trace is blue.
• Threshold (A)
• Ratio (B)
• Attack time (A to B)
• Release time (B to C)
• Vertical scale = dB
6. Threshold Slider – Sets the point at which the Limiter will begin to reduce signal level.
7. Ratio Slider – Sets the ratio of input level to output level when the signal exceeds the
threshold.
8. Attack Slider – Adjusts how quickly the Limiter reacts to a signal that exceeds
the threshold.
9. Release Slider – Adjusts how quickly the Limiter stops Limiting when signal falls below the Threshold.
10. Limiter In Button – Engages or disengages the limiter.
11. Knee In Button – Engages or disengages the Knee. The Knee provides a smoother transition from the Attack to the Release.
the knee engaged.
12. Simple Button – Turns the Simple mode on and off. Hides all controls except:
• Limiter In button
• Simple button
• Reset button
• Limiting (Threshold) knob
13. Reset Button – Sets all the Limiter controls to their factory default position.
TD-000472-00-B
Touch a
Select Button
Limiter Tab
Aux 1 or Main
40
Select
Limiter
1
2
3
4
5
6
A
7
8
9
10
C
B
11 12 13
— Figure 34 —
— Figure 34 shows