1. USB 3 .0, Type A – For attaching USB storage devices
2. K & Lock® Security Slot – Compatible with the MicroSaver Security Cable
3. Power Supply – Use the power supply delivered with the mixer, do not substitute.
4. Talkback microphone – Balanced female XLR
5. Main Right and Left output – Balanced male XLRs
6. Auxiliary outputs 1 through 6 – Balanced male XLRs
TouchMix-8 Back Panel
Refer to
— Figure 16
USB
®
1
2
1. USB 3 .0, Type A – For attaching USB storage devices
2. K & Lock® Security Slot – Compatible with the MicroSaver Security Cable
3. Power Supply – Use the power supply delivered with the mixer, do not substitute.
4. Cue / Monitor – Stereo 1/4" TRS. Line or headphone output is directed to this output when a channel Cue is activated.
5. Aux 3/4 – Stereo 1/4" TRS. Line or in-ear output. This output is wired in parallel with Aux 3 and 4 XLRs.
6. Main Right and Left output – Balanced male XLRs
7. Auxiliary outputs 1 through 4 – Balanced male XLRs
1 Drives must be formatted using the FAT32 file system. For best results use 7200 RPM, USB 3 hard drives or high-speed SSD. Drive performance is critical for recording. For more
information and to see a list of qualified drives, visit qsc.com. At this time, the TouchMix does not support importing or re-importing digital audio files that have been created or edited