10.3.2
Disassembly of the main electronic board
-
Remove the worktop, instructions 10.1.1
-
Mark the plugs and pull them off from the respective component.
-
Now you can exchange the main electronic board
Abb.: 23
10.3.3
The valves
The valves is screwed to the water distributor.
The connection of the inlet hose is guided out of the rear side of the appliance via a valve adaptor.
-
Remove the worktop; instructions 10.1.1
-
Mark the plugs and pull them off
-
Unscrew the valves
Abb.: 24
DGS-TDS-N 11.2004 C.D.
Valves
- 58 -
© Electrolux
Valve adaptor
Main electronic board
599 51 13-50 EN