14. TECHNICAL DATA....................22 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
Before maintenance, deactivate the appliance and • disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the • appliance. Clean the appliance with a moist soft cloth. Only use • neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
2.5 Disposal • Obey the safety instructions on the detergent packaging. • Do not put flammable products or WARNING! items that are wet with flammable Risk of injury or suffocation. products in, near or on the appliance. • Disconnect the appliance from the •...
• : the rinses phase • : the spin phase 5. PROGRAMME CHART Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed Washing programmes 4 kg White cotton and coloured cotton. Normal soil and 1000 rpm light soil.
Page 8
Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed 4 kg Items in denim and jersey. Also for dark coloured 1000 rpm items. Джинсы 60°C - Cold 1 kg Special programme for curtains. The prewash 800 rpm phase is activated automatically.
Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 6. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature. At programme start the display shows the duration programme for the maximum load capacity.
7. OPTIONS 7.1 Температура 7.4 Oтсрочка старта Set this option to change the default With this option you can delay the start of temperature. a programme from 30 minutes to 20 hours. Indicator = cold water. The display shows the related indicator.
indica- ■ ■ ■ ■ ■ ■ 1) If available. 2) Defaullt duration for all programmes. 3) Shortest: to freshen the laundry. 4) Longest: Increasing the programme dura- tion gradually decreases the energy con- sumption. The optimized heating phase saves energy and the longer duration main- tains the same washing results (specially for normal soil).
Page 12
2. Put the laundry in the drum, one item Make sure that no laundry stays between at a time. the seal and the door. There is a risk of 3. Shake the items before you put them water leakage or damage to the laundry.
Page 13
• Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then the maximum level. • Do not set the prewash phase. •...
Page 14
3. Open the door. You can cancel or change 4. Close the door. the set of the delay start 5. Press again. before you press the . To The delay start continues to operate. cancel the delay start: • Press to set the 10.11 Opening the door when...
10.13 Stand-by To drain the water: 1. If necessary, decrease the spin speed. Some minutes after the end of the If you set , the appliance only washing programme, if you do not drains. deactivate the appliance, the energy saving status activates. 2.
• Obey the instructions that you find on • To use the correct quantity of the the on packaging of these products. detergent, check the water hardness of • Use the correct products for the type your domestic system and colour of the fabric, the 11.5 Water hardness...
Page 18
12.6 Cleaning the inlet hose and the valve filter 12.7 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot.
12.8 Emergency drain 0° C, remove the remaining water from the inlet hose and the drain pump. Because of a malfunction, the appliance 1. Disconnect the mains plug from the cannot drain the water. mains socket. If this occurs, do steps (1) through (9) of 2.
Page 21
Problem Possible solution If the delay start is set, cancel the setting or wait for the end of countdown. Deactivate the Child Lock function if it is on. The appliance does not Make sure that the water tap is open. fill with water properly.
Problem Possible solution Make sure you use the correct detergent and the correct quantity of it. You cannot open the Make sure that the washing programme is finished. appliance door. Set the drain or the spin programme if there is water in the drum.
Page 23
Level of protection against ingress of solid parti- IPX4 cles and moisture ensured by the protective cov- er, except where the low voltage equipment has no protection against moisture Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Cold water Water supply Maximum Load...