6.2 TIMER CONNECTORS
(detach all connectors before measuring the contacts!)
6.2.1
Burns on the timer electronic board
In case of burning of the printed circuit of the timer, check that the problem is
not caused by another electrical component (short circuits, poor insulation,
water leakage etc.). Identify the timer connector that is connected to the
burnt-out tracks and check the wiring that powers the component.
Examples:
Connector / track
L2.1-L2.2
H3.1-H3.3
M9.4÷M9.9
Track that connects L2.1 to
H3.3
2001.08 eb
Component that caused
burning
Pilot lamp wiring
Drain pump
Motor
Drain pump
37
599 34 85-05