Access From The Rear Side Of The Appliance; Rear Plate; Assembling Position Of Motor, Motor Electronic Dc, Heating Element - Electrolux EWM 3000 Service Manual

10.2 Access from the rear side of the appliance

10.2.1

Rear plate

The rear plate is screwed to the casing with sheet metal screws (Fig. 17)
- In order to get access to motor, heating element, shock absorber, NTC, belt and pulley,
you have to remove the rear plate.
Abb.: 17
10.2.2 Assembling position of motor, motor electronic DC,heating element, shock absorber,
NTC, belt and pulley
NTC-Sensor
Motor
electronic DC
Abb.: 18
DGS-TDS-N 11.2004 C.D.
Pulley
Heating
element
- 55 -
© Electrolux
Motor
Belt
Shock
absorber
599 51 13-50 EN