Variomatic Loosening-Up Spin; Activate Variomatic Loosening-Up Spin; Deactivate Variomatic Loosening-Up Spin - Electrolux EWM 3000 Service Manual

4.4

Variomatic loosening-up spin

4.4.1

Activate variomatic loosening-up spin

Programming before program start:
- Set selection switch to position ”short spin”.
- Keep ”stain” button pressed at least 5 sec.
- To confirm the ”end” LED is flashing for 5 sec.
- While the ”end” LED is flashing, release the ”stain” button.
- When the flashing has stopped, the variomatic loosening-up spin is active.
4.4.2

Deactivate variomatic loosening-up spin

Programming before program start:
- Set selection switch to position ”short spin”.
- Keep ”stain” button pressed at least 5 sec.
- Immediately when pressing the button, the ”end” LED is flashing.
- After 5 sec the flashing stopps and the LED is lit continuously for 5 sec.
- While the ”end” LED is lit continuously, release the ”stain” button.
- After the ”end” LED has stopped lighting, the variomatic loosening-up spin is cancelled.
In order to check whether the loosening-up spin is activated, set the program selection switch
to ”short spin” and press the ”stain” button shortly. When the ”end” LED is flashing,
the loosening-up spin is activated.
DGS-TDS-N 11.2004 C.D.
- 18 -
© Electrolux 599 51 13-50 EN