14
Use
The light of button
selected programme.
The selector dial can be turned either clockwise or anticlockwise. Position «
Arrêt) to Reset programme/ Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position
«
» (Aus Arrêt), to switch the machine off.
O
Attention!
f you turn the programme selector dial to another programme when the
I
machine is working, the yellow pilot light of button
indicate a wrong selection. The machine will not perform the new selected
programme.
Select the spin speed or the rinse hold option
Press button
be spun at a speed different from the one proposed by the washing machine.
The relevant light will light up.
The maximum spin speed are:
1200 rpm for Model WAG 4L E100
1400 rpm for Model WAG 6L E100
1600 rpm for Model WAG 7L E100
For the maximum speed allowed for each programme, please refer to the chapter
«Washing Programmes».
Rinse Hold (Spülstopp-Anti-Froissage): by selecting this option the water of
the last rinse is not emptied out to prevent the fabrics from creasing. When the
programme has finished the display shows a
on, the Start/Pause light is off and the door is blocked to indicate that the water
must be emptied out.
To empty the water out:
turn the programme selector dial to O
●
select the Drain or Spin programme
●
reduce the spin speed if needed, by means of the relevant button
●
depress button
●
when the programme has finished the display shows a
●
light Door goes off and the door can be opened.
8
starts to flash and the display shows the duration of the
2
repeatedly to change the spin speed, if you want your laundry to
8
8
will flash 3 times to
0
flashing, the pilot light Door goes
0
flashing. The pilot
» (Aus
O