Select The Required Programme By Means Of Programme Selector Dial; Select The Temperature; Select The Spin Speed, Rinse Hold Or Night Cycle Option - Electrolux WA SL2 E100 User Manual

Table of Contents

Advertisement

16
Use
Select the required programme by means of programme selector
dial (1)
You can choose the right programme for any type of laundry following the
descriptions on the washing programme tables (see «Washing Programmes»).
Turn the programme selector dial to the required programme. The programme
selector determines the type of washing cycle (e.g. water level, drum movement,
number of rinses) and the washing temperature according to the type of laundry.
The pilot light of button
the selected programme.
The selector dial can be turned either clockwise or anticlockwise.
Position O
At the end of the programme the selector dial must be turned to
position O, to switch the machine off.
For the description of each washing programmes of the selector dial, consult the
chapter «Washing programmes».
Attention!
f you turn the programme selector dial to another programme when the machine
I
is working, the yellow pilot light of button
Err is displayed on the display to indicate a wrong selection. The machine will not
perform the new selected programme.
Select the temperature (button 2)
Press this button repeatedly to increase or decrease the temperature, if you want
your laundry to be washed at a temperature different from the one proposed by
the washing machine.
The maximum temperatures for each washing programme can be checked in the
paragraph «Washing programmes».
The symbol of cold wash corresponds to
Select the spin speed, NIGHT CYCLE or RINSE HOLD option
(button 3)
When the required programme has been selected, your appliance automatically
proposes the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you want your laundry
to be spun at a speed different from the one proposed by the washing machine.
For the maximum spin speed forseen for each programme consult the chapter
«Washing programmes».
7
starts blinking and the display shows the duration of
Aus Arrêt
= Reset programme/Switching OFF of the machine.
(
)
7
will blink 3 times and the message
(
).

Advertisement

Table of Contents
loading

Table of Contents