Table of Contents
Advertisement
2. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS
w
i
q
r
e
2. TOOL SPECIFICATIONS
PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
RECOMMENDED
OPERATING PRESSURE
LOADING CAPACITY
AIR CONSUMPTION
RECOMMENDED OPERATING PRESSURE:
12 to 23 bar (170 to 320 p.s.i.). Select the operating air pressure within this range for best fastener performance.
DO NOT EXCEED 23 bar (320 p.s.i.).
4. TECHNICAL DATA
q NOISE
A-weighted single-event sound power level ------ LWA, 1s, d 96.42 dB
A-weighted single-event emission sound pressure level at work station ------ L p A , 1s, d 87.82 dB
These values are determined and documented in accordance to EN12549 : 1999.
w VIBRATION
Vibration characteristic value
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-system when using the tool.
An influence to the hand-arm-system when using the tool will for example depend on the gripping force, the contact pressure
force, the working direction, the adjustment of mains supply, the workpiece, the workpiece support.
5. APPLICATIONS
Floor and wall framing
Subflooring
Roof and wall sheathing
Fencing
o
u
!2
!0
y
t
!1
HS90A
12-3/4˝ (325 mm)
4-1/2˝ (114 mm)
11-3/4˝ (300 mm)
6.0 lbs. (2.7 kg)
12 to 23 bar (170 to 320 p.s.i.)
26 to 32 Nails
2
2.5Rat 18 bar (257 p.s.i.)
operating pressure
4.89 m/s
2
q Frame
w Cylinder Cap
e Contact Arm
r Nose
t Magazine
y Trigger
u Grip
i Exhaust Cover
o Trigger Lock Dial
!0 Plug
!1 Discharge Outlet
!2 Hook
3. FASTENER SPECIFICATIONS
NAIL LENGTH
SHANK DIAMETER
SHANK TYPE
HEAD DIAMETER
7
MAX KCM PAPER
TAPE COLLATED
2-3/8˝ to 3-1/2˝ (60 to 90 mm)
.113˝ to .162˝ ( 2.9 to
4.1 mm)
Smooth, Ring, Screw
.270˝ to .290˝ ( 6.8 to
7.4 mm)
Advertisement
Table of Contents
