Making And Answering Calls; Line Selection - Panasonic KX-NT700 Operating Instructions Manual

Making and Answering Calls

Line Selection

The unit can make calls using the following lines.
–
IP line (see page 31)
–
TEL line (see page 31)
–
PS line (see page 42)
–
PC line (see page 44)
When you make a call, the line icon in the upper-right
corner of the display indicates the line that will be used,
therefore, you should confirm the line icon each time
you make a call.
You can change the selected line by pressing the center
function button ([F2]). The line that will be selected is
indicated by the function button icon.
Example:
1.
The IP line is selected.
2.
is pressed. The TEL line is now selected.
TEL
Note
•
If the unit is not connected to an IP network,
is not displayed and the IP line cannot
IP
be selected.
30 Operating Instructions
Selecting the Available Lines
The IP line is always available when the unit is
connected to an IP network; if it is not selected (i.e., if it
is not shown in the upper-right corner of the display),
you can select it by pressing
Whether the TEL line, PS line, or PC line is available is
determined by the "Line Selection" setting. For
example, when it is set to "IP + PS", the IP and PS
lines are available.
You can change the "Line Selection" setting using
the following procedure.
1.
Press [MENU].
2.
Press .
LINE
3.
Select the desired setting.
•
"IP + TEL": The IP and TEL lines are
available.
•
"IP + PS": The IP and PS lines are available.
•
"IP + PC": The IP and PC lines are available.
4.
Press .
SAVE
5.
Press [MENU].
Note
•
When the operation mode is set to "USB
Audio", the "Line Selection" setting is
disabled.
.
IP
Document Version 2010/02