Useful Features; Answering Calls; Ending A Conference Call - Panasonic KX-NT700 Quick Reference Manual

Note
•
When the "Operation Mode" setting is set to
"IP-PBX", only 1 IP call is possible. To have a
conference call, you must use the IP line for 1
party, and the TEL, PS, or PC line for the other
party.

Ending a Conference Call

Press [ ] to disconnect both parties.
or
1.
Press .
END
2.
Press [ ] or [ ] to select the party you would like
to remove from the conference, then press

Answering Calls

1.
Press [ ] or
ANSWER
2.
To end the call, press [
Note
•
When "Line Selection" is set to "IP +
PC" or "IP + PS", TEL calls cannot be made or
received.
Receiving a Second Call
While on a call, you can receive a second call, and then
join the 2 calls and establish a conference call.
Confirming the caller then creating a
conference call
1.
Press .
ANSWER
•
The first call is put on hold, and you can talk to
the second caller.
•
To end the second call, press
continue the first call.
2.
Press to establish a conference call.
CONF
Refusing a second call
Press . The second caller is disconnected and
REJECT
the current call continues.
Note
•
When the "Operation Mode" setting is set to
"IP-PBX", only 1 IP call is possible. To have a
conference call, you must use the IP line for 1
party, and the TEL, PS, or PC line for the other
party.
Document Version 2010/02
.
].
, then
END

Useful Features

Conferencing Phone Manager (CPM)
CPM is computer software that can be used in
conjunction with the unit. It includes the following useful
features:
•
Video conferencing
•
Sharing applications
•
Making calls using the phonebook or call history
See the Operating Instructions for Conferencing Phone
Manager for more details.
.
SELECT
Recording
Conversations and voice memos can be recorded to an
SD memory card (32 MB–2 GB). Insert the SD memory
card with the label side facing up.
To record a conversation, press
conversation.
Speech Speed Conversion
You can adjust the speed of the other party's speech
down during a call by pressing
to change the current setting or turn the feature off.
"Slow" is shown on the display while this feature is
active.
Mic Noise Reduction
You can press the [MIC NOISE CUT/
during a call to reduce the ambient noise that is picked
up by the microphones and sent to the other party. Press
repeatedly to change the current setting or turn the
feature off.
"Noise Cut ON" is shown on the display while this
feature is active.
Quick Reference Guide
during the
REC
. Press repeatedly
SPEED
] button
Quick Reference Guide 7