Setting The Date & Time; Tel Line Settings - Panasonic KX-NT700 Operating Instructions Manual

Setting the Date & Time
Set the unit's date and time setting before using the unit.
The date and time are shown on the display in standby
mode, and are displayed when playing conversations
that were recorded to an SD memory card.
1.
Press [MENU].
2.
Select "Basic Settings", then press
3.
Select "Date & Time", then press
4.
Using the keypad, enter 2 digits each for the year,
month, day of the month, hour (24-hour format), and
minute.
Example: To enter "Jan. 23, 2008, 7:45 PM", press
[0801231945].
•
If you make a mistake, press
the cursor as needed, then enter the correct
number.
5.
Press .
SAVE
6.
Press [MENU].
Note
•
You can select 12-hour or 24-hour time display
(see page 49).
•
The date format varies by the selection made
for the "Language" setting. See page 48 for
details.
Document Version 2010/02

TEL Line Settings

Selecting the Available Lines
To use the TEL line, the "Line Selection" setting
must be set to "IP + TEL". (This is the default setting.)
1.
Press [MENU].
2.
Press
.
SELECT
3.
Select "IP + TEL".
.
SELECT
•
4.
Press
5.
Press [MENU].
to move
Setting the Dial Mode
Set the dial mode to "Pulse" if the TEL line does not
support tone dialing.
1.
Press [MENU].
2.
Select "TEL Settings", then press
3.
Select "Dial Mode", then press
4.
Select "Pulse" or "Tone".
5.
Press
6.
Press [MENU].
.
LINE
When "Line Selection" is set to "IP +
PC" or "IP + PS", TEL calls cannot be made or
received.
.
SAVE
.
SAVE
Operating Instructions
Preparation
.
SELECT
.
SELECT
23