Ubiquiti PowerBridge M10 Quick Start Manual page 7

4. Connect the Main Mounting Bracket to the Dish:
a. Insert two M10x25 Bolts through the bottom of the Main
Mounting Bracket and through the Dish. The bolts should be
on the inside facing outward.
b. Secure each bolt using a M10 Washer, a M10 Spring Lock
Washer, and a M10 Hex Nut.
c. Slide the Main Mounting Bracket onto the Tilt Screw.
d. Secure the Main Mounting Bracket to the Tilt Screw using a
M16 Washer, a M16 Spring Lock Washer, and a M16 Hex Nut.
Hardware Installation
5