Table of Contents
Advertisement
Section 4
IP Access Configuration & Operation
4.7.4 KVM Settings
User Console
The following settings are user specific. This means the super user can customize these
settings for individual users separately. Changing the settings for one user does not affect the
settings for the other users.
User select box
This box displays the user ID for which the values are shown and for which the changes will
take effect. You may change the settings of other users if you have the necessary access rights.
Transmission Encoding
The Transmission Encoding setting allows changing the image-encoding algorithm that is used
to transmit the video data to the Remote Console window. It is possible to optimize the speed of
the remote screen depending on the number of users working at the same time and the
bandwidth of the connection line (Modem, ISDN, DSL, LAN, etc.).
Automatic detection
The encoding and the compression level are determined automatically from the available
bandwidth and the current content of the video image.
Pre-configured
The pre-configured settings deliver the best result because of optimized adjustment of
compression and colour depth for the indicated network speed.
48
Advertisement
Table of Contents
