International Safety Symbols - Extech Instruments EX710 User Manual

Introduction
Congratulations on your purchase of the EX710 Clamp DMM. Careful use of this meter will provide
many years of reliable service.
Safety

International Safety Symbols

This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages
may be present
Double insulation
SAFETY NOTES
•
Do not exceed the maximum allowable input range of any function.
•
Do not apply voltage to meter when resistance function is selected.
•
Set the function switch OFF when the meter is not in use.
•
Remove the battery if meter is to be stored for longer than 60 days.
WARNINGS
•
Set function switch to the appropriate position before measuring.
•
When measuring volts do not switch to current/resistance modes.
•
Do not measure current on a circuit whose voltage exceeds 600V.
•
When changing ranges always disconnect the test leads from the circuit under test.
UL Note
A UL mark does not indicate that this product has been evaluated for accuracy.
Function
A AC
V DC, V AC
Resistance, Capacitance, Frequency, Diode Test
Maximum Input
800A AC
600V DC/AC
250V DC/AC
2 EX710-EU-EN-V3.2-3/12